MIG Welding

Gas Metal Arc Welding (GMAW) is frequently referred to as MIG welding. MIG welding is a commonly used high deposition rate welding process. Wire is continuously fed from a spool. MIG welding is therefore referred to as a semiautomatic welding process.

Benefits

• All position capability
• Higher deposition rates than SMAW
• Less operator skill required
• Long welds can be made without starts and stops
• Minimal post weld cleaning is required

TIG Welding

Gas Tungsten Arc Welding (GTAW) is frequently referred to as TIG welding. TIG welding is a commonly used high quality welding process. TIG welding has become a popular choice of welding processes when high quality, precision welding is required.

Benefits

• Superior quality welds
• Welds can be made with or without filler metal
• Precise control of welding variables (heat)
• Free of spatter
• Low distortion

Stick Welding

Shielded Metal Arc Welding (SMAW) is frequently referred to as stick or covered electrode welding. Stick welding is among the most widely used welding processes. The flux covering the electrode melts during welding. This forms the gas and slag to shield the arc and molten weld pool. The slag must be chipped off the weld bead after welding. The flux also provides a method of adding scavengers, deoxidizers, and alloying elements to the weld metal.

Benefits

• Equipment used is simple, inexpensive, and portable
• Electrode provides and regulates its own flux
• Lower sensitivity to wind and drafts than gas shielded welding processes
• All position capability

We also have facilities & equipments for projection welding, Arc Welding CO2 welding.

A robotic welding system performs more repeatably than a manual welder because of the monotony of the task. Robotic welding systems are able to operate continuously minimizing production line interruptions.

We have rectilinear welding robots of Cloos & ABB makes. They can move in any three axes (X,Y,Z). In addition to linear movement of the robot along axes, there is a wrist attached to the robot to allow rotational movement. These robots are used for highly precise and repetitive welding jobs.

We are proud to have received a prestigious quality certification from DNV, Germany for Stainless Steel Welding assignments of Railways. This certification can facilitate business opportunities in international railways related assignments.

Heavy-duty production tool with cost-reducing Long Life technology for dramatically longer consumable life and much lower operating costs. Plasma will cut any electrically conductive metal....so stainless, aluminum and steel all cut quite well. Ideal for production environments cutting mild steel, stainless and aluminum up to 75 mm (3") thick.

Plasma cutting provides an optimal mix of cut quality, productivity and operating cost for mild steel, stainless and aluminum across a wide range of thickness at a competitive capital equipment price. Plasma does an excellent job on gauge materials, with very precise cut quality and virtually no material warpage.

We have bed plasma cutting machines of German make, Messer , with bed size of 2.8 x 6.5 mtrs & 6.5 x 16 mtrs. These machines are used mainly in heavy thickness sheet steel fabrications.

In Oxyfuel cutting fuel gases and oxygen are used to cut sheet steel. Oxyfuel cutting is a chemical reaction between pure oxygen and steel to form iron oxide. Preheat flames are used to raise the surface or edge of the steel to approximately 1800°F (bright red color). Pure oxygen is then directed toward the heated area in a fine, high pressure stream. As the steel is oxidized and blown away to form a cavity, the preheat and oxygen stream are moved at constant speed to form a continuous cut. Only metals whose oxides have a lower melting point than the base metal itself can be cut with this process. Hence, Only low carbon steel and some low alloys meet the above condition and can be cut effectively with the oxyfuel process. IT can be best used for thickness of around 40 mm.

Oxyfuel cutting provides best results in square top corner (with minimum radius). It can cut face flat top to bottom (no undercut). It can cut face square with respect to top surface. Provides clean smooth surface with near vertical drag lines and little to no slag on bottom edge (easily removed by scraping).

We have oxyfuel Cutting machines with bed size of 2.8 x 6 mtrs & 6.5 x 16 mtrs. These machines are used in medium thickness sheet steel fabrications.

Description / Specification of Sand Blasting

We are involved in offering a wide range of Sand Blasting to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Sand Blasting. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design